NetXG Part - PA-8T-V35

Part Number:

PA-8T-V35

* Related Products *

Cisco 7200 Series

Catalyst Switch

Description:

Data Sheet:

PA-8T-V35

PA-8T-V35, Cisco PA-8T-V35, 8 Port Serial, V.35 Port Adapter

The Cisco PA-8T-V.35, shown in Figure 1-1, provides up to eight synchronous serial interfaces for the chassis. The PA-8T-V.35 network interfaces provide a direct connection between the high-speed bus in the router and external networks. Each PA-8T-V.35 interface provides full-duplex (FDX) operation at T1 (1.544 Mbps) and E1 (2.048 Mbps) speeds. The V.35 interface is most commonly used in the United States and throughout Europe.

All eight PA-8T-V.35 interfaces connect to external networks through a single port that has a 200-pin, D-shell receptacle. You must use a V.35 compact serial cable to connect PA-8T-V.35 interfaces to an external data service unit (DSU) or channel service unit (CSU). The compact serial cable attached to the single receptacle determines the mode (DCE or DTE) for all eight interfaces.

Ordering information for PA-8T-V35 : Request a Quote:

	Model	Description	Quote
	PA-8T-V35	Cisco PA-8T-V35, 8 Port Serial, V.35 Port Adapter
		Required Email Address:
		We protect your information. All email sent to NetXG is forwarded to a real person to check validity and prevent spam.

Cisco Part Number: PA-8T-V35, Cisco PA-8T-V35, 8 Port Serial, V.35 Port Adapter

The PA-8T-V35 is a regular stock item. This PA-8T-V35 can be purchased Online: at GetNetGear.com

If you have any questions about a PA-8T-V35 call us. Phone 805-681-5071. We have a knowledgeable support staff and complete documentation on the PA-8T-V35.