NetXG Part - PA-MC-2T3+

* Related Products *

Cisco 7200 Series

Catalyst Switch

PA-MC-2T3+, Cisco PA-MC-2T3+, 2 port multichannel T3 port adapter

The PA-MC-2T3+ is a single-width port adapter that provides two T3 interface connections using BNC connectors. (See Figure1-1.) Each T3 interface can be independently configured to be either
channelized or unchannelized. A channelized T3 provides 28 T1 lines multiplexed into the T3. Each T1 line can be configured into one or more serial interface data channels.
An unchannelized T3 provides a single serial interface data channel that may be configured to use all of the T3 bandwidth or a fractional portion of it. This mode is compatible with several vendors of fractional (subrate) DS3 data service units (DSUs).

• The PA-MC-2T3+ supports both channelized and unchannelized operations.
• It transmits and receives data bidirectionally at the T3 rate of 44.736 Mbps.
• It conforms to relevant specifications for DS3 (Digital Signal Level 3) circuits.
• The T3 connection, provided by two female BNC connectors for transmit (TX) and receive (RX),
requires 734A coaxial cable that has an impedance of 75ohms.

Ordering information for PA-MC-2T3+ : Request a Quote:

Cisco Part Number: PA-MC-2T3+, Cisco PA-MC-2T3+, 2 port multichannel T3 port adapter

If you have any questions about a PA-MC-2T3+ call us. Phone 805-681-5071. We have a knowledgeable support staff and complete documentation on the PA-MC-2T3+.

NetXG, Inc. Copyright © 2010 All rights reserved.