|
JX-2Serial-S, Juniper JX-2Serial-S, Dual port Synchronous Serial PIM
The Juniper Networks Dual-port Synchronous Serial PIM provides the physical connection to Serial network media types, receiving incoming packets from the
network and transmitting outgoing packets to the network. Juniper Dual-port Synchronous Serial PIM is equipped with a dedicated network processor that forwards
incoming data packets to the Routing Engine, and receives outgoing data packets from the Routing Engine. During this process, the PIM performs framing and line-speed
signaling. When the synchronous serial PIM is installed in a ScreenOS-based SSG Family security appliance, the dedicated network processor will forward traffic to the SSG CPU where
traffic decisions are made based upon security policies.
• Single Serial Interface supports RS232, V.35, X.21, RS449, & EIA530
• Up to 8 Mbps per physical port
• Onboard Network Processor
• Clock Rate configurable
• Crypto Re-synch support
• Juniper Proprietary DTE and DCE cables available for each protocol (10 in all) with
Auto-detection for DTE/DCE modes
Juniper Networks Dual-port Synchronous Serial Physical Interface Module (PIM) is for use with the J2320, J2350, J4300, J4350, J6300, and
J6350 Services Routers as well as the Secure Services Gateway 140 (SSG 140), SSG 300
Series, and SSG 500 Series security appliances. |